As I have finished with all the castings I can't show you, I decided to get back into some stone carving. There are a couple of pieces I have been looking at for some time, considering which areas need more work. There are two pieces I decided to work on at the same time, bouncing back and forth between the two. This helps me to stay fresh on each piece. I work until I am tired of it or uncertain what to do next and then I switch over to the other piece until I am tired of that one.
Some of the work I have done, still more to do...The work was done with a Bosch angle grinder with a 4 inch diamond wheel. I used a die grinder with mounted stone under the neck.
This is the other piece I an working on. I have looked and looked at this piece and was unhappy with the mother wolf's face and basin the pups were playing in. I got tired of the mess from water collecting in it and having to clean it out, so, I removed one side so it will drain. The title of the sculpture is "The Return of the Wolves". The left side of the piece is rough and represents the wild, the right side is smooth and polished and represents civilization. The sculpture represents the downfall of man and return of the wolves. The pups happily play in the broken vessel, not knowing to fear man, but the mother remembers and is wary...
I have smoothed the basin, still don't know exactly what I'm going to do here, leave it as is or carve it further.
This is the wolfs face before I started reworking it. The middle and back muzzle are too wide and make the nose look too narrow. I am way off the form around the cheek bones. The eyes are also too far foward and need to be set further back into the skull. The nose is also too pointed, I will cut back the lips to make it more squared off.
I have lost the nostrils, but I'll just just use a die-grinder to put them back in. The face is much improved but it is still heavy on the wolf's left. I will work on getting that side correct then go on to putting the nostrils back in. Stone is actually very forgiving. I guess that's why I like it, you can always go back, even years later and do a little touch up on a piece. Most of the work was with the Bosch angle grinder and 4" diamond wheel. I pushed back the eyes with a Makita die grinder with a mounted stone.
I was up in Louisville to see the Louisville Clock by sculptor Barney Bright dedicated. The clock is a mechanical piece with figures moving at the the top in the grandstand while various Kemtucky characters (Belle of Louisville, Daniel Boone, etc.) race around the track. It was originally created in 1974 and was plagued with mechanical problems. Adam Burkle, a local business man and a wind-up toy collector, spearheaded an effort to restore the clock and have it running again. It took years and a lot of money to accomplish, but it's finally back and races are being run once again. I have a video of the race that I will post to youtube soon. It's a really cool piece and I'm glad it's back.
This bronze sculpture of Daniel Boone is by Raymond Graf, a well known sculptor based in Louisville Kentucky. It was commissioned by the Daniel Boone Festival Committee and has been installed at the Knox County Court House in Barbourville, Kentucky. I took this photo while it was being finished, and has a lot of the marks of chasing. But, in spite of being in this rough stage, the quality of the work is apparent. The face is wonderfully expressive and there is a lot of attention to detail all through the piece. It's really an outstanding sculpture. Raymond Graf has done a great deal of portrait sculpture- Pee Wee Reese, Colonel Sanders and jockey Pat Day to name just a few.
3 comments:
Nice article and good photos...........a great blog
Great work.. love the wolf mum and cubs. Wish I could do half as well. Just starting out and really appreciate your work. thanks for showing :)
Post a Comment