Sunday, June 5, 2011

A trip to Colorado to get a sculpture


Don and I took a box truck to Colorado to get the sculpture "Light of Hope and Healing" from Art Castings of Colorado.

First, I needed to look at the sculpture and make sure it didn't need any more chasing. Chasing means that the pattern on the bronze matches the pattern on the original clay, particularly where parts were welded together. Don and I went over the whole piece; we couldn't find anything that needed to be cleaned up. The foundry has an overhead bridge crane, which makes it easy to lift a piece onto a table for work. There is a hole through the table so that work can be safely set on it (with threaded rod fit into nuts welded inside the sculpture).

This is Charlotte; she did the chasing on the sculpture. The work she did couldn't be better.

The light fixture had already been attached before we got there, but it needed a little tweaking. The main issue was fitting the globe to the hand so that there wouldn't be any light bleed. Dan welded the hand to make a better fit to the globe, and Ken attached the light assembly and worked the bronze so that the globe would fit down flat and eliminate light from showing between the hand and globe.

This is Dan, who did the welding on the hand.

This is Ken. He really did an excellent job working out the light with help from John Shimp of Lamp Shades Etc. in Louisville Ky. Ken was the main force for bringing the sculpture together while we were there - great guy to work with.

Chad highlights the sculpture. Because I want a very light patina, he is burnishing the sculpture, so that it will stay a lighter color when the patina is applied.

Nate and Chad apply flame to the sculpture as Nate (in the foreground) applies patina.

Nate applies a clear sealant to the sculpture, which will protect the patina.

Nate and Chad, the patineurs. Fantastic job guys, the piece looks beautiful!

This is Jeanne, she is one I go to for quotes and if I have any questions. She is always quick with a response.

Tony wasn't around when I was getting photos of everybody, so this will have to suffice. He is the manager of Art Castings, making sure the foundry runs smoothly.
We did a dry run at the foundry to make sure every works....
The base was created by Bellcomb Technologies and is a granite laminate over honey-combed panel, with a steel frame inside which supports the sculpture.
...another view of the complete sculpture...


....and a view of how it will look from the stairs at the site.

As we left for home, we saw this view in the mirror.

2 comments:

Anonymous said...

Nice work! I enjoy being able to follow your careers in this way.

Meg said...

Thanks,
It's good to have feedback!