Sunday, July 24, 2011

Mold work on two sculptures for an upcoming show

Steve McMillen helps us do the molds; he is taping the shims which will create the partline of the mold. The angel will be a three part mold, poured in plaster with a faux patina. A potential owner will then be able to tell what she will look like in bronze. She will be part of a monument show at Craig Kaviar's Gallery in Louisville,KY. At this point, she has two layers of Polygel 40 and will get 4 more .

This is 'Flight', with shims attached. The plastic shims (available from sculpture Depot in Loveland, Colorado) are coated with Trewax, which acts as a resist, to keep the mold material from adhering to it.

Polyfill is mixed to the polygel 40 for a stiffer, stickier consistency, which will hold the shims. Then, the pins can be removed.

Here is the angel with the shims attached, ready for the next 4 coats of polygel 40.

Flight, with 6 layers of mold material and ready for plaster.

The angel is covered with plaster; this is called a mother mold. While the polygel will capture even the finest of details, it is quite flexible. The plaster acts to support the flexible rubber mold during casting, to maintain the general shape of the sculpture.

Flight gets a plaster shell first on one side. Then, it will turned over and plaster applied to the other side.

This is a cup of Polygel 40 part A.

Yesterday, I met my sisters and my niece and nephew, in French Lick, Indiana, for a wild west train ride. The train is robbed by men on horseback, but the sheriff (seen above) rides in to save the day. My sister Phyllis is on the left, next to her is her friend Pat. My niece, Beth, holds the shotgun. My other sister, Beth's mother, elected not to be in the photo....

We had lunch afterwards, in the restaurant of the French Lick Resort. These are embellishments on one of the ceilings.

Sunday, July 17, 2011

Two pieces for a show and some pics around the studio


This is a piece that I am finishing up for a show in Louisville, Ky. She is an Angel, and I am defining her fingers with a wood tool. I have yet to do her ear...

This is another piece, entitled "Flight", which will also be in the show.

Here are some pics around the studio. A fence lizard...

A tiny jumping spider on my arm taken with a micro lens...

...and this is some type of insect. I couldn't find it in my guide book.

Tuesday, July 12, 2011

Dancer goes to a new home and Light of Hope and Healing dedication

The Dancer has sold - the new owner built a crate and came to take him home, to Georgia.
The crate was secured and packing material was added to keep the sculpture safe.

The base was secured.
The Dancer, in his new home.

He certainly has beautiful surroundings. It's nice to see my sculptures go to good homes.
My sculpture, "The Light of Hope and Healing", was dedicated at the Hux Cancer Center. This is the plaque.

The sculpture looks kind of cool before the unveiling.

This is a portion of the crowd that came to watch the unveiling.

I (in the middle) wait to talk. Mary Kramer, who I worked with on this project (she was great),is to my right. Jon Robeson, executive director of Arts Illiana, is to my left. I enjoyed talking to him, as he is really into birds and birding.

Scott Teffteller, President and Ceo of Union Hospital, spoke to the crowd.

Here I am with the unveiled sculpture. Edith Tucker, on the right side of the photo, is my brother in law's aunt. She lives in Terre Haute and was able to attend the ceremony.

Here is the finished sculpture. I like all the reflected lights in the floor - they seem to mirror the light in the sculpture.

We stayed the night at the Hilton (courtesy of Artspaces - many thanks) and this (I think it is a hibiscus) was planted just outside.

Sunday, July 3, 2011

Otter fountain finally finished

With the return of the summer heat, my thoughts have turned toward finishing a water fountain that I started back in the spring -there are a number of posts earlier in the blog showing the hollowing out of this basin and carving the lilypads and flowers.

I managed to get the old crane truck started, to move the Otter fountain basin close to the shop so that the pump can be plugged in.

I rigged it up with nylon slings to lift it. I placed 'softeners' of old fire hose, to keep the sharp edges of the stone from cutting the slings.

Don made a larger basin area from timbers and pond liner. The limestone basin is sitting on soapstone supports, the pump is located beneath the limestone.

Next, add water...

The pump is plugged in, but the flow is barely visible and not what I had hoped. Ah well, back to buy a bigger pump.

A close-up.

What I saw when I was leaving the studio.

Saturday, June 18, 2011

Installing Light of Hope and Healing at the Hux Cancer Center


Don and I took the bronze sculpture and base to it's final destination, the Hux Cancer Center in Terre Haute, Indiana in a Penske box truck with a lift gate. We were met at the Hux by 3 employees of Sycamore Engineering, who had done the engineering for the center.

Don made 2 boxes similar to what Art Castings had, so that access was available, for bolting the sculpture to the base.

We rented a Genie lift from Art's Rental in Louisville Ky to lift the sculpture onto the base. Mary Kramer, on the right, is with Artspaces Inc. which oversees public art commissions in the area. She worked with me through the whole process and made everything go smoothly.

Another view from the stairs.

Don lowers the sculpture, while Mike feeds the wires from the light through the base.

We set up the sculpture, and moved it a couple of times, before we were sure of the best position. Next, comes drilling holes for the 4 threaded rods that will attach the sculpture to the floor. Mike holds the template for the bottom of the base, while Don carefully marks the holes.

Then, the drilling begins. First Mike...

Then Dave...

Tom gets a turn too! The floor is not that thick, but there was metal to contend with, so it took a while to break through...

Finally, the holes are drilled, the rod fit into the sculpture and then, it is set in place.

...and then, the light is turned on.

Another view of the sculpture.

...and one from the waiting room..
...and finally a detail.

While we were in Colorado...

After we left the foundry on the first day, we decided to rent a car and drive up into Rocky Mountain National Park. We weren't even in the park yet, when we saw an Elk in the road.

We saw plenty of Elk in more scenic areas.

There are lots of photo ops...

We went part of the way up Trail ridge road, but there had been lots of snow and the road was closed about a half mile from where this photo was taken.

We almost got above tree line, but not quite....