Wednesday, March 27, 2013

My Proposals for Anchorage Alaska have been submitted, Large sections of stone removed on "Discovery"

I am a finalist for a public art commission in Anchorage Alaska and have submitted my proposals to the committee.  Time will tell if I will receive the commission..until then, work continues on "The Discovery".
 This stone is for the left arm of "Discovery"  The raw block is significantly larger than what I need so two sections will be split off.  First the stone is drilled (holes about one foot deep) then metal wedges are placed in the holes between metal devices called feathers.  The wedges are hammered in with a large hammer.  The feathers act to spread the stone apart. The wedges are hammered again and again and again and again. (you get the idea, a long time)
 Then you hear a deep "Thunk" which means the stone has cracked and then it's just a few more hammerings and it splits.  Of course it doesn't just fall over like this, a pry bar was involved and a handful of boards before the stone was convinced to "fall over"/
 The process is repeated for another section of the stone.
 Stone removal on the head has continued as well.  These cuts were made with the hydraulic chainsaw.
 The stones are piling up around the block.  They need to be moved before further work can continue, so...
 The pieces of stone are rigged up...
 and loaded on the truck.  They will taken to the "yard" where the raw stone is kept.
 Partially, loaded, just a couple more to go....
We have had unseasonably cold temperatures and it has snowed very late this year.  This O'Possum is normally nocturnal but it made a few day time appearances lately, coming to eat the sunflower seed I put out for the birds.  I don't mind feeding 'Possums, I think they're kind of cute....

Tuesday, March 19, 2013

The new project begins

The new project "The Discovery" has begun.  Some of the stones are much larger than their final form.  They are carefully measured and then large areas will be split off.  One technique for removing large areas of stone is by drilling holes and then hammering feather and wedges into the stone to split off a large section.  The holes are made with a hammerdrill. Each hole is about 16" deep
 This block will be one of the arms of the giant reclining woman.
 This block will become the right leg and foot.  The flattened area will be the bottom of the piece.
 The block of stone pictured above will be the head of "The Discovery".  The front corners need to be removed and for that, the hydraulic power unit and the hydraulic chainsaw come into play.  The saw (sitting on top of the stone) can cut 18" into the stone.  Careful measurements from the model head were made.  These measurements showed were corners could be safely removed from the stone. The lines for the cuts were first marked with crayon (see earlier post) and then an angle grinder.
 The chainsaw has made it's cuts.  After the corners were cut all around - each side and then from the top, wedges are inserted into the cut.
 The wedges are placed in the side and top of the stone.  The ideal place for the stone to fall is straight in front of the block. That is why the wedges are being struck on the left side instead of the right, I want the stone to fall forward.  Let's hope it does...
 The wedges are hammered into the stone. As the wedges are hammered deeper into the stone the sound changes, each time the hammer hits the there is a pinging sound.  That sound changes the deeper the wedges are driven into the stone until there is a dull sound when the wedges are struck, that signifies a crack has been made and it won't be long until the rock splits off...
 I switched over to a sledge hammer, the small hammer didn't have enough power.
 It is a nice, cleanly split stone, some day it will become a sculpture.
 I set the wedges and hammer them in to take out the next corner....


Success!
Catrina pretends she is a mighty lionness. The deer don't appear disturbed...

Tuesday, March 12, 2013

The new project, the stones come in













This is my new project. She is a forty foot long earthwork and limestone sculpture entitled
"The Discovery"  a young woman gazes at someone sitting in her hand.  Is it you? 




The project is for See Art Orlando in Orlando, Florida.  I am one of 7 artists selected to create public art for the city.  See Art Orlando is a public/private partnership in which private donors sponsor the public art commissed and then donate them to the city. 
Here is a link to the site-

and here is a link to a newspaper article about the artists selected -


Three trucks from Stonebelt Trucking in Bedford, Indiana, brought the stones to the studio.  And a 90 ton crane from Bramer Crane was there to meet them.






Kevin operated the crane.  We set the rigging to unload one of the stones.





Jeromie, the rigger, also from Bramer Crane, watches the stone as it is lifted off the truck.  This stone will be one of the arms.


Jeromie steadies the load as it comes down onto the timbers.  This stone will be the knee.  The whole project is huge but it was decided before the stones came in where each should go and timbers laid out for each one. It was a long day but all the stones were put in their proper place.  Many thanks Bramer Crane and Stone Belt!





The next step in the job is determining the points of the sculpture.  Pins are placed to determine high points.



The stone fits the model perfectly. This is the top of the block the face will be in.  The circle with the cross in it corresponds to the pin in the top of the model.




This is another of my "fun" shots.  It is the glass lid of a pan with condensation from steam.





Monday, February 25, 2013

A new project is about to begin, Louisville, KY opens a new pedestrian bridge

I just received a commission for a public sculpture.  The commissioning agency plans on announcing this and other sculptures it is acquiring in a few days, so I will wait to post photos of the models and name the organization.  The commission will be carved in limestone from multiple blocks.  Here are some photos of the quarry (Indiana Limestone Company, formally Victor Oolitic of Bloomington, Indiana.

 There are lots and lots of blocks in the quarry...
 ...acres of stone.  But finding the right size blocks can be difficult.  Fortunately, the company has a computer program listing stones by their length, depth and height so we could go right to the stones for the job.
Like this one...
 and this..
...and this one, Brent Blackwell paints my name on the rock.
 and this one too, a couple other besides.  I'll post pictures of the project in the next blog.
 Louisville Kentucky has refurbished the Big Four Railroad bridge into a pedestrian walkway.
There was a large crowd on the Saturday that I walked it.

Thursday, February 14, 2013

The Bright Lights Exhibition and creating a Veterinarian in water clay

New Albany Indiana's Arts Council has several exhibitions about sculptor Barney Bright (who created "The Search, a monumental sculpture at the New Albany Free Public Library) as well as those who worked with him.  I attended the opening of the "Bright Lights" exhibit which is at  Spring Street.  It is a group show of people who worked at Bright Foundry or merely had work cast there.  The show is a who's who of area sculptors as well as well known painters.
This painting is by Robert Jackson. He worked at Bright Foundry back in the 80s.  He has done a great deal of art in the city, working in various capacities including set painting for Actors Theatre of Louisville,KY.
This striking print is by Mary Lou Hess.  She was one of a group that acquired "The Search" for the Library in New Albany.
I begin work on the water clay version of a Veterinarian holding a puppy (the mother dog stands next to the doctor, watching). I begin by blocking in the clay using the smaller castilene model as a guide.
I use skewers to stabilize the heavy water clay.  Later I use a wire tool to cut open different areas of the sculpture and hollow it out.  I then stuff moistened paper towels into the cavity. This helps to lighten the sculpture so it doesn't slump.


I work up the features of the sculpture with loop tools and now refer to the original photo reference of the Veterinarian instead of using the smaller maquette.  I have worked up the puppy the doctor is holding and place it at the end of his arms.  I will then work the hands onto the puppy and doctors arms. Notice I use pillars of clay to support the arms.





The arms are a bit drier than the clay of the puppy  so I wrap them with damp towel paper to get them moister. I have added additional support under the pup as well.


I have removed the supports under the arms but the support under the puppy remains.  I will leave that until the clay is fairly dry. 






Sunday, February 10, 2013

Beth's sweet 16

My niece just turned 16 and so, family gathered for the party.  I this photo, from left to right - My Aunt Bunny, my sister Phyllis, my sister-in-law Denise, Beth's brother Joe and my brother Mark.
The house was festively decorated in pink for the occasion.  Beth's little brother Joe has just run through these pink streamers, too fast for the camera to record.

Everyone sings Happy Birthday to Beth. 
Beth watches as her older brother, Danny, cuts the cake.
Now the best part of the party - presents!
Beth's grandfather and I always have a session of "Dueling cameras" at family gatherings.
A pinata added to the festivities.  Beth takes a swing with a small baseball bat.
It took many hits (adults finally had to get involved) before the pinata was broken and candy spilled on the floor and the kids descended upon it.