Bears are installed! Dedication May 15th 2:00 All welcome!

The Pollards, who commissioned the bear as a memorial for their son Matt, came out to watch and photograph the bears being moved.

The rigging was coming up against the mother bear's left hind foot. The resulting pressure while lifting the piece could have broken it, so Dereck Sheroan readjusts the rigging, lifting the bears slightly off center, to take pressure off the foot. Way to go Dereck! Charlie Pollard films the installation for a documentary he is creating. He will be leaving soon for college in San Francisco where he will be majoring in Film.

Loaded up and ready to go...

Away go the bears on their one and only trip away from home.

The Pollards follow in their car.

Out on interstate 64.

The bears arrive at Kosair Children's Hospital

The crane truck sets it's outriggers which stabilize it.

The bears get a look at their new home.

The bears, rigged up and ready to be hoisted into place.

Wheee!

Another view of the lift...

The bears are placed on boards, so that the slings can be removed. One of the slings is then made into a choker hitch, in order to raise up one side of the bear. Then, one of the boards can be removed. The process is repeated on the other side so that the bear sits flat on the concrete pad.

The bears in their new home.

The Pollards with the bears, being interviewed by their son Charlie for the documentary.

"you know...for kids."

Work continues, trolley hop and bear approval

I cut the face from the side of the sculpture so that I can begin carving in the facial features.

I keep the face to check against to make sure the eyes, mouth, etc are in the right position.
I use a china marker to sketch the arm, hair,waist and skirt.

I begin forming the body with a 4" angle grinder. I cut around the arm as well. I start to lightly define the leg.

Switching off the stacked piece to Ophelia, I trimed off the edges of the stone using an angle grinder. I used a hammer to tap off the sections of stone to be removed.

We attended the opening of Chris Mozier's one man show at the downtown Bristol. Here are some of the other people attending. Excellent work with a mix of subtle colors with strong accents and interesting textures. Don and I were impressed.

Chris's show was during the trolley hop (first Friday) so we made the most of our Lousiville visit and went to several galleries - Zephyr, Pyro and we also ventured into Tim Faulkner Gallery- first time for us. There is an interesting group of work that can be discovered by exploring through various rooms.

We parked behind this facade of a building. I thought the light made for an interesting shot.

The man and woman who commissioned the bear came out to see and approve it today. They were very happy with the piece. I didn't think of snapping a picture while they were looking at the bear but I got this pic of their son, daughter and friends on our caboose!

Seldom do you see the red belly of the Red Bellied Woodpecker. Here it is...

Finishing touches on the bears.

For the finish work, I employ halogen worklights. One pair is up on scaffolding, the other on the ground, to help me see areas that need just a bit more work.

I am nearly finished with this area, just a bit more cleanup necessary.

I use a china marker (basically a black crayon) to mark where I need hairs, and notes about what needs to be done in an area. The note says "edge" and has arrows pointing to the nose indicating the edge needs to be more rounded. Crosshatching means an area is too high.

I have marked where I need additional hairs with the black crayon and have further deepened the crease under the mother's chin and neck.

This is a small flat end burr that I use to create a deep shadow under the mother's chin and neck.

I use a point burr to add fur texture in creases.

I also use it to clean up areas around the eye.

It was a foggy day at the studio....

I feed birds, and today while I was putting out seed, I came upon this possum looking for snacks. I stayed very still - they have terrible eyesight -and watched him as he foraged for food. He would walk along, then suddenly turn to root around in the leaves and eat whatever morsel he found. He came very close to me (just a few yards) never realizing I was there.

And then, he wandered away.

fur and more fur - detailing the cubs

I am carving the claws of the cub that is being cleaned by its mother. This is a ball diamond burr with 1/4" shank.

These are some of the diamond burrs that I use for carving the bear's claws, nose, fur, etc. The ball is very effective for removing stone when I start to define an area. I start with the largest burr to begin carving the form, and then work down to smaller and narrower burrs. The two burrs on the right are used more for fur, the point for creases and to define eyes, nose, etc. When carving a form it is best to think about carving around the form instead of carving on the form. If that makes sense. I get diamond burrs from www.lopacki.com

This is the hair inside the mother's right rear leg. The interior areas of the sculpture are some of the most difficult, as I have to use a large die grinder which is slow and the area needs to be blown out periodically as the dust loads up pretty quick.

This is the intersection of the cub's foot, mother's left elbow and her rear leg. I have just begun to define it - it will need a little deeper carving to get the definition that I want.

I have carved out the area between the cub's upper arm and the mother's back foot and have applied a fur pattern. Also, I have opened the area between the cub's head and mother's back foot and I have blocked out the mother's claws.

The bears, from the right side.

This is the left side of the bears. I have recarved the mother's shoulder and have reworked the mother's fur texture on this side, but I will go back and add more depth with deeper carving. The fur needs several passes to get the look that I'm after.
Juanita was in my last post and I thought I'd show you another of my donkeys, Ed. He has had a treat and is begging for another. Can't you tell he's saying "Please?"

A Doe looks at me while her fawn eats cracked corn. We started feeding deer accidentally. The store where we buy sweet feed for the donkeys loaded up a bag of cracked corn by mistake. Corn is too rich for the donkeys to eat, so we started feeding the deer and once you start, it's hard to stop.

This is a snow flake on the car window surrounded by frost crystals .

Finishing touches on the Bears and sky high photo

While I am working on the hair pattern, I check both sides to make sure the pattern is somewhat consistant. I am working in various areas, refining the cub's feet, opening up the areas between the cub's legs and the mother's, as well as refining her face, nose and eyes.

This is the mother's right forearm. I have used a diamond wheel tool on the fur at the bottom of the photo. The testure at the top is from a masonry wheel on an angle grinder. You can see how much more dimension is achieved by using the diamond wheel. It is a lot more work, though. Also, you need a good strong light from the side in order to really see what you're doing.

This is a flared flat ended diamond tool on a small die-grinder for putting hairs on the cub's foot. I do a lot of shaping with this tool, as I put on the hair.

I use the same tool for cutting in the nose of this cub.

It's also handy for setting the eye back into the skull.

I use a larger die-grinder to open the area between the mother bear's leg and the cub's leg. I work the area from both sides until I have it opened.

How did I manage to get a photo of the property from so high up? I'll never tell!

This is some insect work going on here - this is from earlier in the year, just ran across it and thought it was interesting.